Section 9 TROUBLESHOOTING
9-10
4
If paper can be seen on top of the conveyor unit as well,
remove the paper without tearing it.
NOTE
If the paper does happen to tear, remove any loose scraps
from inside the copier.
5
Replace the paper conveyor unit in its original position in
the copier.
6
Close the front cover.
NOTE
Be sure to hold both the left and right sides of the front
cover and close it securely.
Misfeed in the transfer unit
If a misfeed has occurred in the transfer unit, perform the following
procedure to remove the jammed paper.
* The following display will be displayed after you pull out the
paper conveyor unit in step 2.
Inch specifications
Metric specifications
1
Open the front cover.
!"
To Next Page
Loading...
