Section 7 COPIER MANAGEMENT
7-94
Customize screen layout (Main functions)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the “Basic” and the
“User choice” tabs in order to make the display more appropriate to
the way you use the copier.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-66.)
Inch specifications
Metric specifications
2
Select “Customize(Main function)” under the “Default
menu” column on the left side of the touch panel and then
press the “Change #” key.
The “Customize(Main function)” screen will be displayed.
Inch specifications
Metric specifications
3
If you want to change the order of the basic functions and
modes, press the “T” or the “S” cursor key to select the
item you want to move. Then press the “Move Ahead” key
or the “Move Behind” [“Move backward”] key to move that
item and change the order of display. The final display of
the basic functions and modes will be in accordance with
the numbers in the list and those shown in the tabs to the
left of that list.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
!
!
!!!
" "
"
!
" !
###
$ $
$
!
" #
$ %& '
( )#*
+ #"
, %
-
!"
# $!
% & '
( )$*
+ $#
, -
.
To Next Page
Loading...
