Kyocera KM-C850

Section 10 MAINTENANCE AND OPERATION INFORMATION
10-9
Main Body
Type ................................................................................ Desktop
Original table .................................................................Fixed type
Copying system .............................................................. Indirect electrostatic, internal transference drum
Acceptable originals.......................................................Sheets of paper, books and 3-dimensional objects (Maximum size: 11" × 17" [A3])
Acceptable copy paper sizes .......................................... Drawers[cassettes]: 11" × 8
1/2", 8 1/2" × 14", 11" × 17", A5R, B5R, A4, B4 (257 mm ×
364 mm) and A3
Multi-bypass tray: 5
1/2" × 8 1/2", 8 1/2" × 11", 11" × 8 1/2", 8 1/2" × 13", 8 1/2" × 14", 11" ×
17", 12" × 18", A6R, B6R, A5R, B5R, B5, A4R, A4, B4 (257 mm × 364 mm), A3, A3 wide
(305 mm × 457 mm, metric specification copiers) and Folio (metric specification copiers)
During 2-sided copying: 11" × 17" [A3] – 11" × 8
1/2" [A5R]
Print margin loss: 0. 5 mm – 5.5 mm
Copying speed ................................................................11" × 8
1/2" [A4] size original at 100% (1:1) magnification ratio: 8 copies/min. (full color);
31 copies/min. (monochrome)
11" × 8
1/2" [A4] size original during 2-sided copying: 8 copies/ min. (full color);
21 copies/ min. (monochrome)
11" × 17" [A3] size original during 2-sided copying: 4 copies/ min. (full color);
7.5 copies/ min. (monochrome)
Warm-up time ................................................................ Within 180 secs. (at room temperature of 73.4°F/23°C, humidity 60%)
First copy speed .............................................................Full color: Within 24.5 secs.
Monochrome or monocolor: Within 10.8 secs.
Available magnification ratios ......................................Any 1% increment between 25% and 400% or standard pre-set ratios
Memory...........................................................................Standard copiers: 256 MB of Bitmapping memory
Duplex copiers: 256 MB of Bitmapping memory and 20 GB of image storage memory
Resolution....................................................................... Reading: 600 × 600 dpi
Writing: 600 × 600 dpi
Paper feed system ..........................................................<Automatic feeding from drawers[cassettes]>
Standard copiers: Two 500-sheet capacity drawers[cassettes] [60 g/m² – 90 g/m²]
Duplex copiers: One 500-sheet capacity drawer[cassette] [60 g/m² – 90 g/m²]
<Manual feed from the multi-bypass tray>
150-sheet capacity [60 g/m² – 90 g/m²]
Acceptable copy paper ................................................... <Weight>
Drawers[cassettes]: 60 g/m² – 90 g/m²
Duplex Unit: 60 g/m² – 90 g/m²
Multi-bypass tray: 60 g/m² – 220 g/m²
<Types>
Drawers[cassettes]: Standard copy paper, color paper
Duplex Unit: Standard copy paper, color paper
Multi-bypass tray: Standard copy paper, special paper (Color paper,
OHP transparencies, etc.) and envelopes [only available when the
optional printer functions are used]
Continuous copying........................................................1 – 999 sheets
Light source....................................................................Rare gas lamp
Developing system ......................................................... Dry dual-element process
Fixing system .................................................................Heat roller
Cleaning system............................................................. Blade and fur brush
Photoconductor...............................................................a-Si (amorphous silicon)
Specifications