Section 7 COPIER MANAGEMENT
7-103
Perform the following procedure if it seems like the printed image
is blurred or running, or if there are unprinted white areas on the
page. The drum refreshing operation will take approximately
5minutes.
1
With the content of the “Basic” tab displayed, press the
[Default Setting/Counter] key.
The “Default setting” screen will be displayed.
2
Press the “User adjustment” key.
Inch specifications
Metric specifications
3
Use the keypad to enter the 4-digit management code.
The factory default setting is “3100”.
If the entered code matches the registered one, the “User
adjustment” screen will be displayed.
Inch specifications
Metric specifications
4
Press the “Drum refresh” key. The “Drum refresh” screen
will be displayed.
Inch specifications
Metric specifications
Drum refresh
!
!
To Next Page
Loading...
