Kyocera KM-C850

Section 7 COPIER MANAGEMENT
7-104
5
Press the “On” key. The drum refreshing process will begin.
This operation will take approximately 5 minutes.
Inch specifications
Metric specifications
6
Once the operation is completed, press the “Close” key.
The touch panel will return to the screen in step 4.
Inch specifications
Metric specifications
7
Press the “Close” key.
The touch panel will return to the screen in step 2.
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.

    
         

 


    
         

 

Now drum refreshing.
Please wait.
Now drum refreshing.
Please wait.