Section 9 TROUBLESHOOTING
9-8
Misfeed in the multi-bypass tray
If the following display appears, a misfeed has occurred in the
multi-bypass tray. Perform the following procedure to remove the
jammed paper.
Inch specifications
Metric specifications
1
Remove all of the paper remaining in the multi-bypass
tray.
2
Reset the paper in the multi-bypass tray.
3
Open and then close the front cover. The misfeed
indications will disappear. You can now resume copying.
NOTE
Be sure to hold both the left and right sides of the front
cover and close it securely.
To Next Page
Loading...
