Section 7 COPIER MANAGEMENT
7-30
Printer function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the printer functions of this machine.
NOTE
This setting is only available when the optional Printer
Kit is installed in your copier.
1
Select “Print. Managem.” under the “Setting item” column
on the left side of the touch panel and then press the
“Change #” key.
The “Print. Managem.” screen will be displayed.
Inch specifications
Metric specifications
2
To turn copy management ON for the printer functions of
this machine, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
3
Press the “Close” key.
The touch panel will return to the screen in step 1.
!
"
!
"
To Next Page
Loading...
