Section 7 COPIER MANAGEMENT
7-59
Time difference
Sets the time difference from the world standard time (GMT).
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Time difference” under the “Default menu” column
on the left side of the touch panel and then press the
“Change #” key.
The “Time difference” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “+” key or the “-” key to change the displayed time
difference to the desired setting.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
!
!
!"
#$"
! "#
$#
!
To Next Page
Loading...
