Section 6 OTHER CONVENIENT FUNCTIONS
6-11
7
Press the [Start] key.
Scanning of the originals will start.
If you set the originals in the optional Document Processor,
copying will start automatically.
If you set an original on the platen, a message will be
displayed telling you to set the next original. In this case,
go to the next step.
8
Replace the first original with the next one and press the
[Start] key.
Scanning of that next original will start.
9
Once you have finished scanning all of the originals, press
the “Scanning finished” key.
Copying will start.
To Next Page
Loading...
