4-50
Troubleshooting > Troubleshooting When Feeding Paper
1 In case that dog ear is observed, check and remove paper piece, foreign material or burr
on parts in paper path.
2 If there is paper that get folded then remove it.
2
Check paper curl
Paper get curled.
1 [Home] key > [...] > [Professional Settings] > [731 Set Decurler]
2 Select [Simplex], [Duplex], [Simplex(DE)] or [Duplex(DE)].
Select [Simplex] or [Duplex] when setting the decurl of the decurl unit for main unit.
Select [Simplex(DE))] or [Duplex(DE)] when setting the decurl of the decurl unit for Inverter
and Decurler Unit.
3 Select the paper weight you want to adjust.
The specifications of the values that can be set according to the printing surface and the
paper weight are as follows.
Decurl unit for main unit
Decurl unit for Inverter and Decurler Unit
Item Simplex Duplex
Range Default Amount of change Range Default Amount of change
Normal 1 1.0 to 6.0 +1 1 3.0 to 6.0 +4 1
Normal 2 1.0 to 6.0 +1 1 3.0 to 6.0 +4 1
Normal 3 1.0 to 5.0 +1 1 2.0 to 5.0 +4 1
Heavy 1 1.0 to 4.0 +1 1 2.0 to 4.0 +3 1
Heavy 2 1.0 to 3.0 +1 1 1.0 to 3.0 +1 1
Heavy 3 1.0 to 2.0 +1 1 1.0 to 2.0 +1 1
Heavy 4 1.0 to 2.0 +1 1 1.0 to 2.0 +1 1
Heavy 5 1.0 to 2.0 +1 1 1.0 to 2.0 +1 1
Heavy 6 1.0 to 2.0 +1 1 1.0 to 2.0 +1 1
Item Simplex(DE) Duplex(DE)
Range Default Amount of change Range Default Amount of change
Normal 1 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Normal 2 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Normal 3 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Heavy 1 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Heavy 2 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Heavy 3 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Heavy 4 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
To Next Page
Loading...
