2-19
Daily Management and Maintenance > Changing Settings
2
[Home] key > [...] > [Professional Settings] > [U917 Read/Write
Backup Data] > [01 Import] > [Start] key
3
[01 Paper Catalog] > [On] > [Start] key
Importing of the Paper Catalog starts.
When an error code appears during processing, take action by referring the table below.
When importing is complete, "Completed"appears.
4
Display the screen.
[Home] key > [USB Drive]
Do not remove the USB drive until the import is complete. Data or USB drive may be
damaged.
Error code Description Action
e0001 Error in processing
communication.
Remove the USB drive, turn off and
on the machine, and then insert the
USB drive. Wait at least 5 seconds
after turning off the power before
turning it on.
If the problem is not resolved,
change to the another USB drive.
e0002 File access error (Access failure
to USB drive etc.).
e0005 File is broken. Retry the file export to USB drive.
If the problem is not resolved,
change to the another USB drive
and retry the file export.
e0100 to eFFFF Processing error during import/
export.
Remove the USB drive, turn off and
on the machine, and then insert the
USB drive. Wait at least 5 seconds
after turning off the power before
turning it on.
If the problem is not resolved,
change to the another USB drive.
To Next Page
Loading...
