LACO Technologies TITAN Test - 14.Trouble Shooting; 14.1 Serial communication via RS232 (common)**

LACO PROTOCOL DESCRIPTIONS TITANTEST™
135
© 2018 LACO TECHNOLOGIES, INC. - TitanTest itra01en1-07 SB.fm - 1807
13.3 Commands**
Command Meaning
Relates to LD cmd. no. Read/Set
*CAL Start calibration, acknowledge closed external test leak 4 W
*CLS Clear Error 5 W
*CONFig:ALARMDelay Alarm delay after evacuation [s] 602 R/W
*CONFig:AUDio Audio alarm type (PIN, SET, TRIG, PROP) 600 R/W
*CONFig:AUTOTest:BACKGround Auto test BG limit [sel. unit] 640 R/W
*CONFig:AUTOTest:BGTimer Auto test BG timer [s] 632 R/W
*CONFig:AUTOTest:DELAYTimer Auto test delay timer [s] 630 R/W
*CONFig:AUTOTest:EXTTrigger Auto test external trigger 641 R/W
*CONFig:AUTOTest:REJECTMode Auto test reject mode 642 R/W
*CONFig:AUTOTest:TESTTimer Auto test test timer [s] 631 R/W
*CONFig:BEEP Beep-sound (OFF, ON) 604 R/W
*CONFig:CALAccess CAL access (OFF, ON) 427 R/W
*CONFig:CALleak:EXTSniff External test leak in sniff mode 392 R/W
*CONFig:CALleak:EXTVac External test leak in vacuum mode 390 R/W
*CONFig:CALleak:INT Internal test leak 394 R/W
*CONFig:CALREQ Calibration request (OFF,ON) 419 R/W
*CONFig:CAThode Cathode (1,2) 530 R/W
*CONFig:CONTrol location of control (LOCAL, RS232, PLC, LOCAL/RS232, ALL) 2591 R/W
*CONFig:FILTER Leak rate filter "DYNAMIC","STATIC","WITHOUT" 402 R/W
*CONFig:LANGuage Language (ENGlish, DEUtch, FRAncais, ESPanol, RUSsian) 398 R/W
*CONFig:LCDAutorange Display range auto / manual --- R/W
*CONFig:LCDDECades Number of display decades --- R/W
*CONFig:LCDInvert Invert display --- R/W
*CONFig:LCDSCALELog Display scale lin. / log. --- R/W
*CONFig:LIMITLOW Lower display limit 454 R/W
*CONFig:MASS Mass (2 (H2), 3, 4(Helium)) 506 R/W
*CONFig:MFAE Actual anode potential reference [V] 167 R/W
*CONFig:MFAE:M2 anode potential reference [V] mass 2 433 R/W
*CONFig:MFAE:M3 anode potential reference [V] mass 3 434 R/W
*CONFig:MFAE:M4 anode potential reference [V] mass 4 435 R/W
*CONFig:MINVOLume Minimum audio volume 421 R/W
*CONFig:MODE Mode (VAC, SNIFF, AUTO_TEST) 401 R/W
*CONFig:PARTIALFlow:EVACuation Configuration of partial flow pump for evacuating
(Fore_PUMP, Fore_AND_Partial_flow_PUMP,
Partial_flow_PUMP)
626 R/W
** Feature not available in TITANTEST™ Maintenance model