LACO ORIGINAL OPERATING INSTRUCTIONS TITANTEST™
14
© 2018 LACO TECHNOLOGIES, INC. - [TitanTest itna01en1-07 BA.fm] - 1807
FINE enabled yes yes
Switching threshold FINE 5 mbar yes yes
GROSS enabled yes yes
Switching threshold GROSS 15 mbar yes yes
Maximum evacuation time 30 minutes yes yes
Venting with Stop yes yes
Calibration request off yes yes
int. calibration leak see calibration leak no no
Ext. Calibration leak (vacuum) 1E-7 mbar l/s yes yes
Ext. Calibration leak (sniff) 1E-5 mbar l/s yes yes
Calibration mode int. auto yes yes
Table 3: Factory settings
Parameters Default value Reset to default val-
ue when factory set-
tings are loaded
Included in set of
parameters
To Next Page
Loading...
