Document number: Q5WA-QA13-003-EN Version 04
EU DECLARATION OF CONFORMITY
Manufacturer: LAUDA DR. R. WOBSER GMBH & CO. KG
Pfarrstrasse 41/43 97922 Lauda-Königshofen Germany
We hereby declare under our sole responsibility that the machines described below
Product Line: PRO Serial number: from S210000001
Types: P 10, P 20, P 30, P 2 E, Additional pump PRO
comply with all relevant provisions of the EC Directives listed below due to their design and type of construction in
the version brought on the market by us:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU In connection with (EU) 2015/863
The equipment is not covered by the Pressure Equipment Directive 2014/68/EU, as the maximum classification of
the equipment is Category 1 and it is covered by the Machinery Directive.
The protective objectives of the Machinery Directive with regard to electrical safety are complied with in accordance
with Annex I Paragraph 1.5.1 in conformity with the Low Voltage Directive 2014/35/EU.
Applied harmonized standards:
EN ISO 12100:2010
EN 61326-1:2013
EN 55011:2016 + A1:2017
EN 61000-6-3:2007/A1:2011/AC:2012
EN IEC 61000-6-2:2019
EN 61326-3-1:2018
EN 61010-1:2010/A1:2019/AC:2019-04
EN 61010-2-010:2014
Authorized representative for the composition of the technical documentation:
Dr. Jürgen Dirscherl, Head of Research & Development
Lauda-Königshofen, 19.07.2021
Dr. Alexander Dinger, Head of Quality Management
To Next Page
Loading...
Need help?
General
