Document number: Q5WA-QA13-003-EN Version 04
EU DECLARATION OF CONFORMITY
Manufacturer: LAUDA DR. R. WOBSER GMBH & CO. KG
Pfarrstrasse 41/43 97922 Lauda-Königshofen, Germany
We hereby declare under our sole responsibility that the machines described below
Product Line: PRO Serial number: from S210000001
Types: RP 3035, RP 2040, RP 2045, RP 1090, RP 2090, RP 10100,
RP 240 E, RP 245 E, RP 250 E, RP 290 E
comply with all relevant provisions of the EC Directives listed below due to their design and type of construction in
the version brought on the market by us:
Machinery Directive 2006/42/EC
Low voltage directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU in connection with (EU) 2015/863
The equipment is not covered by the Pressure Equipment Directive 2014/68/EU, as the maximum classification of
the equipment is Category 1 and it is covered by the Machinery Directive.
The protective objectives of the Machinery Directive with regard to electrical safety are complied with in accordance
with Annex I Paragraph 1.5.1 in conformity with the Low Voltage Directive 2014/35/EU.
Applied harmonized standards:
EN ISO 12100:2010
EN 378-2:2016
EN 61326-1:2013
EN 55011:2016 + A1:2017
EN 61000-6-3:2007/A1:2011/AC:2012
EN IEC 61000-6-2:2019
EN 61326-3-1:2018
EN 61010-1:2010/A1:2019/AC:2019-04
EN 61010-2-010:2014
Authorized representative for the composition of the technical documentation:
Dr. Jürgen Dirscherl, Head of Research & Development
Lauda-Königshofen, 19.07.2021
Dr. Alexander Dinger, Head of Quality Management
To Next Page
Loading...
Need help?
General
