Lauterbach TRACE32-ICD - Little Endian Operation

PPC600 Family Debugger | 23
©
1989-2022 Lauterbach
Little Endian Operation
TRACE32 supports debugging processors which are operated in big-endian mode, true little-endian mode
and modified (PowerPC) little-endian mode. The debugger switched to little-endian presentation, if MSR[LE]
and one of the following system options is set:
• For true little-endian mode, enable SYStem.Option.LittleEnd.
• For modified (PowerPC) little-endian mode, enable SYStem.Option.PPCLE.
The following table lists processors which support one or both little endian modes:
Processor true little
endian
modified
little endian
Notes
MPC603
MPC745
MPC750 (FSL)
MPC755
PPC750xx (IBM)
—Yes
MPC5121
MPC5123
MPC5125
Yes — e300 core only supports true little endian
MGT5100
MPC5200
Yes Yes HID2[TLE] == 1 for true little endian
MPC74XX —Yes
MPC8247
MPC8248
MPC8271
MPC8272
—Yes
MPC83XX Yes — e300 core only supports true little endian
MPC86XX —Yes