Unacceptable Fuel:
Do
not use any regular unleaded, regular leaded, or premium unleaded
gasoline having more than
10%
ETHANOL or more than
5%
METHANOL even
if
it
contains
cosolvents or corrosion inhibitor and regardless of octane rating.
Alcohol extended fuels may result in engine running quality problems such as vapor lock, fuel
"starvation", or moisture absorption do to phase separation on premix fuel.
If
running quality
problems are experienced, switch to a gasoline without alcohol.
Alcohol attracts and holds moisture which may cause corrosion of metallic parts of the fuel
system.
Phase Separation
Phase separation causes the engine to run without oil even though oil
was mixed properly to begin with. Engine failures due to lack of proper
lubrication are not covered by warranty.
To Engine
!
Gasoline
1%
By
Volume
Oil
Mix
Water Absorption
Alcohol Water
Emulsion
of
Water
and
Oil
To Engine
NOTE:
Metallic and nonmetallic parts of the entire fuelsystem should be inspected frequently
and replaced if signs of excessive stiffness, deterioration corrosion, or fuel leakage are found.
Inspect at least annually.
SAFETY WARNING: Fuel leakage can contribute to
a
fire
or
explosion
To Next Page
Loading...
Need help?
General
