Leaf Aptus-II Installation Guide

Installation Procedures 85
Figure 5: Locking the Leaf Aptus digital camera back into position
To change the orientation of Leaf Aptus:
1. Switch the Multiple/Revolving lever on the side of the Mamiya RZ67
camera to
R position.
2. To switch from landscape to portrait orientation, gently rotate the
digital camera back 90° clockwise until it snaps into place.
Multiple/Revolving Lever
Note: Make sure the Multiple/Revolving lever is set to M.

Leaf Aptus-II Specifications

General

Brand	Leaf
Model	Aptus-II
Category	Camera Accessories
Language	English