94 Chapter 10 – Large Format
The Digital Camera Back on a Large Format Camera with a Rollei Electronic
Shutter
1. Make sure the camera is securely mounted on a tripod.
2. Attach the lens with the Rollei shutter to the large format camera.
3. Attach the Graflok adaptor to the backside of the camera and secure it.
4. Remove the protective cover from Leaf Aptus.
5. Attach the digital camera back to the Graflok adaptor.
6. Attach the Lens Control flex holder to the tripod.
7. Attach the Rollei Lens Control to the flex holder.
8. Connect the cable of the Rollei Lens Control to the Rollei electronic
shutter cable.
9. Connect the Rollei Lens Control power interface battery to the Rollei
Lens Control.
10. Insert the AC adaptor into the input on the Rollei Lens Control power
interface and connect the other end of the power supply cable to the
power outlet.
11. Connect one end of the Rollei-Aptus Lens Control interface cable to
the B port of the Rollei Lens Control and the other end to the Camera
Control jack of Leaf Aptus.
12. Insert one end of the Camera-to-Sync cable into the Rollei Lens
Control Sync jack and the other end into the Camera-to-Back Sync
jack on Leaf Aptus. If you are working in tethered mode, go to step 14
now.
13. Install the compact flash card. The installation is complete.
Working in tethered mode:
14. Install the Leaf Capture application from the CD.
15. Insert the Live Video View software access key into the USB port of
the computer.
16. Start the Leaf Capture application.
To Next Page
Loading...
Need help?
General
