2 Chapter 1 – Introduction
About This Guide
This guide includes the necessary instructions for installing a Leaf® Aptus
digital camera back. Each stage in the installation process is explained in
the guide as follows:
The following additional information is also provided in this guide:
Product Overview
The Leaf Aptus digital camera back is the world’s first camera back that
includes a built-in large (6 x 7 cm) LCD and an innovative graphic user
interface. An integrated battery and compact flash (CF) storage card
ensure easy shooting. New hardware offers a continuous non-stop burst,
and a faster capture rate. These shooting capabilities combined with large
storage options give professionals the flexibility to meet the most
demanding shooting situations. Unique wireless display technology, a new
Chapter 2 Using the Portable
Hardware.
Read this chapter to learn how to insert and
remove the compact flash and a digital
magazine.
Chapter 3 Charging the Batteries Read this chapter to learn how to charge the
batteries for both a compact flash and digital
magazine.
Chapter 4-10 Attaching the Camera Back The instructions for attaching the camera
back to the camera body vary for each camera
type and are detailed in separate chapters.
Read only the chapter that relates to your
camera type.
Chapter 11 Working in Tethered Mode Read this chapter to learn how to connect
your camera back to the computer
Chapter 12 Caring for the IR Filter Glass Read this chapter to learn how to clean the IR
filter glass that protects the sensor.
Chapter 13 Attaching the Diffusion
Filter
Read this chapter to generate custom gain
files for calibration purposes.
To Next Page
