Leaf Aptus-II Installation Guide

Installation Procedures 43
Attaching the Leaf Digital Camera Back to the Camera Body
1. Mount the camera body on a tripod.
2. Remove the protective cover plate from the digital camera back.
3. Position the magazine retention groove onto the magazine support on
the camera body.
4. Swing the digital camera back toward the camera body and firmly
press it into place until you hear a click.
Figure 4: Attaching the Leaf Aptus digital camera back to the camera body

Leaf Aptus-II Specifications

General

Brand	Leaf
Model	Aptus-II
Category	Camera Accessories
Language	English