6 Chapter 2 – Using the Portable Hardware
Items Required for the Installation
The following table describes what is included in the Leaf Aptus digital
camera back kit and which items in the kit are required for the installation.
Important: To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
Kit Contents Required for
Installation
Leaf Aptus digital camera back
Ye s
FireWire cable (4.5 m / 15 ft.) Yes
Camera-to-Back Sync cable. This cable is included only
with the following cameras: Hasselblad (500 Series),
Mamiya RB, Mamiya RZ67/RZ67ProII/RZ67ProIID,
and large format.
Ye s
Focusing screen or mask (not included with the Leaf
Aptus digital camera back for large format camera’s)
Ye s
Leaf Capture application and accompanying
documentation
Ye s
To Next Page
