92 Chapter 10 – Large Format
Before Getting Started
This chapter describes the Leaf Aptus digital camera back installation for
large format cameras and other view cameras.
With the Rollei electronic shutter and the Rollei Lens Control unit, the Leaf
Capture application enables you to change shutter speed and lens aperture
on the large format camera from the application.
The Leaf Aptus digital camera back can also be used with a mechanical
shutter lens such as the Copal shutter.
Items Required for the Installation
For a detailed list of the items required for installation, see Items Required
for the Installation on page 6.
The following table shows the extra items that are required for the Leaf
Aptus digital camera back installation when working with a large format
camera.
Important: To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
Kit Contents Required for Basic
Installation
4 x 5 Graflok adaptor Yes
Live Video View software access key Yes
Additional Items Required for Rollei Electronic Shutter Installation
Rollei Lens Control Yes
Lens Control power interface Yes
AC adaptor for Rollei Lens Control and power cord Yes
Rollei-Aptus Lens Control interface cable Yes
Lens Control flex holder and clamp Yes
To Next Page
Loading...
Need help?
General
