Quick Installation Reference 71
Quick Installation Reference
1. Install the focusing screen mask into the viewfinder.
2. Mount the adaptor plate on the camera body.
3. Remove the protective cover from the Leaf Aptus digital camera back.
4. Attach the digital camera back to the adaptor plate.
5. Connect the Camera-to-Back Sync cable between the camera lens and
the Leaf Aptus digital camera back
. If you are working in tethered
mode, go to step 7 now.
6. Install the compact flash card. The installation is complete.
Working in tethered mode:
7. Install the Leaf Capture application from the CD and start the
application.
8. Connect the FireWire cable between the computer and the Leaf Aptus
digital camera back.
After you connect the cable, the application automatically connects to
the Leaf Aptus digital camera back. When the connection is
established, the LED indicator on the digital camera back turns from
orange to green.
Note: If you want to work with an external flash or strobe, connect the
Flash Sync cable between the Leaf Aptus digital camera back and the flash
or strobe unit.
To Next Page
Loading...
Need help?
General
