Installation Procedures 87
Connecting the Camera-to-Back Sync Cable
1. Insert one end of the Camera-to-Back Sync cable into the Mamiya
Lens Flash socket.
2. Insert the other end of the cable into the Camera-to-Back Sync socket
on the adaptor plate.
Figure 7: Connecting a Camera-to-Back Sync cable to Leaf Aptus
Connecting the Flash Sync Cable
¾ Connect the flash sync cable to the Flash Sync connector on Leaf
Aptus.
Note: The Leaf Aptus digital camera back together with the Flash Sync cable is
only suitable for use with external flash or strobe lighting.
To Next Page
Loading...
Need help?
General
