106 Chapter 12 – Caring for the IR Filter Glass
Figure 2: Cleaning protective IR filter glass
6.
If necessary, repeat the cleaning procedure until the protective IR filter
glass is clean.
Important:
• Never use the dry cloth for cleaning.
• Never clean the protective IR filter glass with the window or lens cleaner.
The residues from these products may permanently cloud the glass plate.
• Never spray compressed air directly on the digital camera back.
• Do not reuse cleaning wipes.
• Put the protective cover over the sensor plate whenever the digital camera
back is not attached to the camera.
• To prevent contamination of the sensor, do not remove the protective IR filter
glass.
• The protective IR filter can be replaced only by Leaf dealers or by the Creo
Service Center.
Note: Cleaning wipes and cleaning fluid are supplied with the Leaf Aptus digital
camera back. You can order additional wipes from your local Leaf dealer.
To Next Page
Loading...
Need help?
General
