LeeBoy LB Performance CB95 - Page 25

Table 2-2. System Capacity Specications
ITEM SPECIFICATION
Fuel 30 gal
Engine Lubrication Oil Rell Capacity 7.4 qt
Engine Coolant 14 qt
Hydraulic Oil Tank 25 gal
Axle 4.7 qt
Table 2-3. Fuel and Lubricant Specications
ITEM SPECIFICATION
Engine Oil 15W-40, API CH-4, CI-4
Hydraulic Oil All Weather All Temperature VG32
Fuel Ultra-Low Sulfer Diesel
Grease Shell Avania EP Grease or Equivalent
Drive Axle 80W-90LS GL5
Engine Coolant Ethylene/Glycol or Propylene Glycol
Master Cylinder All Weather All Temperature VG32
Table 2-4. Engine Specications
ITEM SPECIFICATION
Manufacturer and Model Hatz 4H50TIC
Engine Type 74 HP, 4-Cycle Liquid Cooled Diesel, Tier 4 Final
Peak Torque 184 ft. lb. @ 1600 RPMs
Displacement 119 cu in
Combustion System; Intake System Direct Injection; Turbocharged, Air Cooled
Power Rating HP 74 HP @ 2500 RPMs
Maximum Speed 2500 RPMs
Fuel Low Sulfer Diesel (do not use any other type of fuel)
Table 2-5. Drive System Specications
ITEM SPECIFICATION
Transmission 2-Speed Hydrostatic
Steering Hydraulic, Orbital Motor, 3.7 GPM. Priority ow at 103 Bar, 1500 PSI.
Rear Axle Comer 068 Series
Tire Size ST225x75-15R, Load Range E
Tire Ination Pressure 50 PSI, 3.45 Bar
Travel Speed LOW: 0 - 12 mpg HIGH: 0 to 22 mpg
Hydrostatic Pump Displacement 2.8 CIR
Hydrostatic Motor Displacement 2.8 CIR
Brakes, Limited Slip 2-Wheel Wet Disc, Foot-Operated with Hand-Operated Park Brake
22
LB Performance CB95 Broom
2-5
Information and Specications