General Safety Instructions
4 Power Analyzer NORMA 4000, NORMA 5000
EO1111G REV G
2 General Safety Instructions
The design and manufacture of this device conform to the latest
state of technology and the safety standards laid down in IEC
61010-1/ 2nd edition. If used improperly, there is a risk of damage
to persons and property.
The device is assigned to protection class I according to IEC
61010-1 and is equipped with a protective earth connector.
The device may only be operated by suitably qualified
personnel.
For the purpose of these instructions, all persons who are familiar
with the installation, assembly, connection, inspection of
connections and operation of the analyzer and who have
completed training in at least one of the following areas:
- switching on/off, enabling, earthing and identification of
electrical circuits and devices/systems according to the
applicable safety standards;
- maintenance and operation of appropriate safety gear, in
accordance with the applicable safety standards;
- first aid.
Ensure that all persons using the device have read and fully
understood the operating manual and safety instructions.
The device may only be used under certain ambient
conditions. Ensure that the actual ambient conditions conform
to the admissible conditions laid down in chapter "Technical
data".
During operation, ensure that the cooling vents are not
obstructed.
Always comply with the instructions in chapter "Transport and
storage".
Do not use the device for any other purpose than the
measuring of voltages and currents that are within the
measuring ranges and categories, including voltage to earth,
laid down in chapter "Technical Data".
Improper use shall void all warranty.
The warranty period for fault free operation is limited to
2 years from the date of purchase.
The warranty period for accuracy is 2 years.
Ensure that the power and connecting cables used with the
device are in proper working order.
Ensure that the protective earth connector of the power lead is
connected according to the instructions to the low-resistance
unit earth cable.
Ensure that the power and connecting cables as well as all
accessories used in conjunction with the device are in proper
working order and clean.
Protection class
Qualified
personnel
Safe operation
Proper use
Warranty
Electrical
connections
To Next Page
Loading...
Need help?
General
