Transport and Storage
Power Analyzer NORMA 4000, NORMA 5000 67
EO1111G REV G
11 Transport and Storage
11.1 Transport
Transport the device only in its original packaging.
Keep the operating manual supplied with the device for future
reference.
Protect the device during transport against heat and moisture;
do not exceed temperature range of -20 °C to + 50 °C and
max. humidity of 85%.
Protect the device against impacts and loads.
11.2 Storage
Keep original packaging, as it might be required at a later
stage for transport purposes or to return the device for repairs.
Only the original packaging guarantees proper protection
against mechanical impacts.
Store the device in a dry room; the temperature range of -20°C
to + 50 °C and maximum humidity of 85 % may not be
exceeded.
Keep the operating manual supplied with the device for future
reference.
Protect the device against direct sunlight, heat, moisture and
mechanical impacts.
12 Warranty
The warranty period for faultless operation and compliance
with the specified uncertainty of measurement is limited to 2
years from the date of purchase.
Damage due to improper use, overload or operation under
conditions that are outside the range of permitted ambient
conditions are not covered by the warranty.
Warranty covers only technical data that is specified with a
tolerance range. Values or limits for which there are no
tolerances specified are intended for information purposes
only.
13 Recalibration
The manufactorer recommends recalibrating the device every
2 years. The device can be calibrated by the manufactorer
service department or any other calibration specialist.
14 Maintenance
Ensure that the ventilation slots are not blocked. Otherwise,
the device is maintenance-free.
To Next Page
Loading...
