General Safety Instructions
6 Power Analyzer NORMA 4000, NORMA 5000
EO1111G REV G
2.1 Safety instructions on the device housing
The mains connection must conform to the following
ranges/values:
Mains:
85...264 VAC, 47...440 Hz/ 40 VA
120...370 VDC, 40 VA
The maximum input voltage for over-voltage category CAT II may
not exceed 1000 V to earth (
).
Do not remove the cover.
Refer servicing to qualified personnel.
The device may only be used indoors.
Conformity mark re. EC Low Voltage Directive 73/23/EEC and
EMC Directive 89/336/EEC.
Mains connection
Input voltage and
maintenance
Indoor use only
To Next Page
Loading...
