Measuring process
54 Power Analyzer NORMA 4000, NORMA 5000
EO1111G REV G
To change to the table view of the spectrum, press function
key tab/gra.
8.5 Integration function / electrical work
For the calculation of integrated values the values are measured
over time. You can configure up to six independent values (Um,
Im, S, P, Q) for the calculation.
Press measuring key WAV.
A key for the calculation of the electrical work is shown in the
assignment bar for function keys.
Press function key ∫.
The assignment bar shows the functions used for the
calculation.
To Next Page
Loading...
