Attention:Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithout
eitheradriveorafillerpanelinstalledineachdrivebay.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage35.
Toremovea3.5-inchhot-swapSAS/SATAharddiskdrive,completethefollowingsteps.
Step1.Unlocktheleft-sidecover.
Note:Youmustunlocktheleft-sidecovertoopenorremovethebezel.Whenyoulocktheleft-side
cover,itlocksboththecoverandthebezel.
Step2.Openthebezel(see“Openingthebezelmediadoor”onpage181).
Step3.Rotatethedrivetrayhandleofthedriveassemblytotheopenposition.
Step4.Graspthehandleofthedriveandpullthedriveoutofthebay.
Drive tray
Hot-swap
hard disk drive
Release
latch
Figure116.Pulloutthedrive
Ifyouareinstructedtoreturntheservercomponentoroptionaldevice,followallpackaginginstructions,
anduseanypackagingmaterialsforshippingthataresuppliedtoyou.
Installinga3.5-inchhot-swapharddiskdrive
Usethisinformationtoinstalla3.5-inchhot-swapSAS/SATAharddiskdrive.
Beforeinstallinga3.5-inchhot-swapharddiskdrive,readthefollowinginformation:
•Inspectthedrivetrayforsignsofdamage.
•Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithouteithera
driveorafillerpanelinstalledineachdrivebay.
•Youdonothavetoturnofftheservertoinstallhot-swapdrivesinthehot-swapdrivebays.
Readthesafetyinformationin“Safety”onpagev
and“Installationguidelines”onpage35.
202Systemx3500M4InstallationandServiceGuide