Hazardousvoltage,current,andenergylevelsarepresentinsideanycomponentthathasthislabel
attached.Therearenoserviceablepartsinsidethesecomponents.Ifyoususpectaproblemwith
oneoftheseparts,contactaservicetechnician.
Readthesafetyinformationin“Safety”onpagev
and“Installationguidelines”onpage35.
Attention:Staticelectricitythatisreleasedtointernalservercomponentswhentheserverispowered-on
mightcausetheservertohalt,whichmightresultinthelossofdata.Toavoidthispotentialproblem,
alwaysuseanelectrostatic-dischargewriststraporothergroundingsystemwhenyouworkinsidethe
serverwiththepoweron.
Toremoveahot-swappowersupply,completethefollowingsteps.
Notes:
1.Ifonlyonehot-swappowersupplyisinstalledintheserver,youmustturnofftheserverbeforeremoving
thepowersupply.
2.Youmustinstallthefancageassemblybeforeremovingorinstallingthepowersupply.
Step1.Disconnectthepowercordfromtheconnectoronthebackofthepowersupplythatyouare
removing.
Step2.Pressthereleaselatchonthehot-swappowersupplyandpullitoutfromtheserver.
Hot-swap
power supply
Release
latch
Hot-swap
power-supply
filler panel
Power supply 1
Power supply 2
Figure172.Hot-swappowersupplyremoval
Ifyouareinstructedtoreturntheservercomponentoroptionaldevice,followallpackaginginstructions,
anduseanypackagingmaterialsforshippingthataresuppliedtoyou.
Installingahot-swappowersupply
Usethisinformationtoinstallahot-swappowersupply.
Thefollowingnotesdescribethetypeofacpowersupplythattheserversupportsandotherinformationthat
youmustconsiderwhenyouinstallapowersupply:
Chapter6.Removingandreplacingcomponents255
To Next Page
Loading...
