Figure44.DIMMinstallation
Step4.Touchthestatic-protectivepackagethatcontainstheDIMMtoanyunpaintedmetalsurfaceonthe
outsideoftheserver.Then,removetheDIMMfromthepackage.
Step5.TurntheDIMMsothatthealignmentslotaligncorrectlywiththealignmenttab.
Step6.InserttheDIMMintotheconnectorbyaligningtheedgesoftheDIMMwiththeslotsattheends
oftheDIMMconnector(see“System-boardinternalconnectors”onpage27
)forthelocations
oftheDIMMconnectors).
Figure45.InsertDIMMintoconnector
Chapter2.Installingoptionaldevices67
To Next Page
Loading...
