Lenze E84AYCER - Page 90

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 90
Parameter reference
Parameters of the communication module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13862
C13864
Parameter | Name:
C13862 | Bus counter
Data type: UNSIGNED_32
Index: 10713
d
= 29D9
h
Display of the data cycles per second (independent of data changes)
Display range (min. value | unit | max. value)
0 4294967295
Subcodes Info
C13862/1 Data cycles per second
C13862/2 Read cycles per second
C13862/3 Write cycles per second
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13864 | Active station name
Data type: VISIBLE_STRING
Index: 10711
d
= 29D7
h
Displays the active station name used by the inverter.
It may differ from the contents of code C13899
, depending on whether the station name has been changed via the
fieldbus or via C13899
.
Setting the station name
( 36)
Subcodes Info
C13864/1 1st ... 30th character
C13864/2 31th ... 60th character
C13864/3 61th ... 90th character
C13864/4 91th ... 120th character
C13864/5 121th ... 150th character
C13864/6 151th ... 180th character
C13864/7 181th ... 210th character
C13864/8 211th ... 240th character
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT