Lenze EPM-T110 - Page 12

Total index
2
Guide
2.3
l
2.3-3
EDSPM-TXXX-3.0-04/2004
CANopen
- Connecting, 5.2-2, 6.2-2, 6.3-2, 6.4-2, 6.5-2
- Connection to the module, Pin assignment, 5.2-2,
6.2-2, 6.3-2, 6.4-2, 6.5-2
- Networking via, 10.1-1
- Wiring, 8.5-1
Capacitance per unit length, 8.5-1
CE conformity, 1.4-1
COB-ID,9.2-2,10.2-2
Commissioning, 11.1-1
- I/O system IP20 on the controller 93xx, 11.3-1
Communication Object Identifier, 9.2-2, 10.2-2
Compact modules, Compatibility, with drive and
automation components, 9.4-9, 10.4-9
Compact system
- Dimensions, 7.3-1
- Mounting dimensions, 7.3-1
Compatibility
- Compact modules, with drive and automation
components, 9.4-9, 10.4-9
- Modular system, with drive and automation
components, 9.4-9, 10.4-9
Conformity,1.4-1,4.2-1
Connecting the supply voltage, 8.4-1
Connection
-CANopen,5.2-2,6.2-2,6.3-2,6.4-2,6.5-2
Pin assignment at the module, 5.2-2, 6.2-2, 6.3-2,
6.4-2, 6.5-2
-Systembus(CAN),5.2-2,6.2-2,6.3-2,6.4-2,6.5-2
Pin assignment at the module, 5.2-2, 6.2-2, 6.3-2,
6.4-2, 6.5-2
D
Definitions, Terms, 2.2-1
Degree of pollution, 4.2-1
Description
- 16xdig. I/O compact (single-wire conductor), 6.3-1
- 16xdig. I/O compact (three-wire conductor), 6.4-1
- 16xdigital input, 5.4-1
- 16xdigital output 1A, 5.6-1
- 1xcounter/16xdigital input, 5.15-1
- 2/4xcounter, 5.13-1
- 32xdig. I/O compact, 6.5-1
- 4xanalog input, 5.10-1
- 4xanalog input / output, 5.12-1
- 4xanalog output, 5.11-1
- 4xrelay, 5.8-1
-8xdig.I/Ocompact, 6.2-1
- 8xdigital input, 5.3-1
- 8xdigital input / output, 5.9-1
- 8xdigital output 1A, 5.5-1
- 8xdigital output 2A, 5.7-1
- CAN gateway, 5.2-1
- SSI interface, 5.14-1
- Terminal module, 5.16-1
Device status
- of the heartbeat producer, 9.8-2, 10.8-2
- of the I/O system IP20, 9.7-2, 10.7-2
- of the slave, 9.7-2, 10.7-2
Diagnostic data, Transmission with analog modules,
12.3-6
Digital inputs, Status request, 9.11-3, 10.11-3
Digital modules
- 16xdigital input, Parameter setting, 12.2-1
- 16xdigital output, Parameter setting, 12.2-1
- 8xdigital input, Parameter setting, 12.2-1
- 8xdigital input / output, Parameter setting, 12.2-1
- 8xdigital output, Parameter setting, 12.2-1
Digital outputs, Status request, 9.11-4, 10.11-4
Dimensions
- Compact system, 7.3-1
- Modular system, 7.2-1
Disassembly, M odule, 7.2-3
disassembly, Module, 7.3-2
E
EMC
- Assembly, 8.2-1
- Earthing, 8.2-1
- Shielding, 8.2-1
Emergency telegram, 9.11-2, 10.11-2
Show/Hide Bookmarks