Lenze EPM-T110 - Fig. 12.4-47 Signal Characteristic of 24 Xcounter in the Mode 23 (Upcounter, Set Function); Fig. 12.4-48 Signal Characteristic of 24 Xcounter in the Mode 24 (Downcounter, Set Function); Fig. 12.4-49 Signal Characteristic of 24 Xcounter in the Mode 25 (Upcounter, Reset Function)

Parameterising 2/4xcounter module
2 × 32 bit counter with GATE and set/reset (modes 23 ... 26)
12
Parameter setting
12.4
12.4.13
l
12.4-37
EDSPM-TXXX-3.0-04/2004
Tt0H Tt0L
TclH2dTreH2d
xxxx xxxx
0000 0004 0000 0005 0000 0006 0000 0007
RES
GATE
CLK
Counter 0
0000 0008
Out0
0
epm-t102
Fig. 12.4-47 Signal characteristic of 2/4xcounter in the mode 23 (upcounter, set function)

Compare reached
Tt0H Tt0L
TclH2dTreH2d
xxxx xxxx
0000 0009 0000 0008 0000 0007 0000 0006
RES
GATE
CLK
Counter 0
0000 0005
Out0
0
epm-t103
Fig. 12.4-48 Signal characteristic of 2/4xcounter in the mode 24 (downcounter, set function)

Compare reached
Tt0H Tt0L
TclH2dTreH2d
xxxx xxxx
0000 0004 0000 0005 0000 0006 0000 0007
RES
GATE
CLK
Counter 0
0000 0008
Out0
01
epm-t104
Fig. 12.4-49 Signal characteristic of 2/4xcounter in the mode 25 (upcounter, reset function)
OUT0 LOW active

Load counter

Compare reached
Signal characteristic in mode 23
Signal characteristic in mode 24
Signal characteristic in mode 25
Show/Hide Bookmarks