Use To
Allow color copies
On
O
Enable color in copies.
Notes:
• On is the factory default setting.
• Setting this to O will hide all color‑specific menus.
• This setting overrides the Color setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two‑sided (duplex) or one‑sided, and
then specify whether the copy should be two‑sided or one‑sided.
Notes:
• 1 sided to 1 sided—The original document has print on one side, and the
copy will also have print on one side.
• 1 sided to 2 sided—The original document has print on one side, while
the copy will have print on both sides.
• 2 sided to 1 sided—The original document has print on both sides, while
the copy will have print on just one side.
• 2 sided to 2 sided—The original document has print on both sides, and
the copy will also have print on both sides.
Paper Saver
O
2‑up Portrait
4‑up Portrait
2‑up Landscape
4‑up Landscape
Allow copying of two or four sheets of a document on one page.
Note: O is the factory default setting.
Print Page Borders
On
O
Allow page borders in printed copies.
Note:
O
is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Understanding the printer menus 100
To Next Page
Loading...
