EasyManuals Logo

Lexmark CX310 series User Manual

Lexmark CX310 series
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Use To
USB Buer
Disabled
Auto
3K to [maximum size allowed]
Set the size of the USB input buer.
Notes:
Auto is the factory default setting.
Disabled turns o job buering.
The USB buer size value can be changed in 1-KB increments.
The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buers, and whether Resource Save is
set to On or O.
To increase the maximum size range for USB
Buer,
disable or reduce
the size of the parallel, serial, and network buers.
The printer automatically restarts when the setting is changed from the
printer control panel. The menu selection is then updated.
Mac Binary PS
On
O
Auto
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
Auto is the factory default setting.
On processes raw binary PostScript print jobs.
O filters print jobs using the standard protocol.
ENA Address
yyy.yyy.yyy.yyy
Set the network address information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
ENA Netmask
yyy.yyy.yyy.yyy
Set the netmask information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
ENA Gateway
yyy.yyy.yyy.yyy
Set the gateway information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
SMTP Setup menu
Use To
Primary SMTP Gateway Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Specify the amount of time in seconds before the server stops trying
to send an email.
Note: 30 seconds is the factory default setting.
Reply Address Specify a reply address of up to 128 characters in the e-mail sent by
the printer.
Understanding the printer menus 91

Table of Contents

Other manuals for Lexmark CX310 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CX310 series and is the answer not in the manual?

Lexmark CX310 series Specifications

General IconGeneral
Print TechnologyColor Laser
Scan TechnologyCIS
ADF Capacity50 sheets
Duplex PrintingYes
Standard ConnectivityUSB 2.0, Ethernet
Memory512 MB
Display2.4-inch color LCD
Maximum Paper Size8.5 x 14 inches
Scanner TypeFlatbed, ADF
Processor Speed800 MHz
FunctionsPrint, Copy, Scan
Copy Resolution600 x 600 dpi
Network ConnectivityEthernet
Operating Systems SupportedWindows, Mac OS, Linux
Standard Paper Input250 sheets
Paper Capacity250 sheets
FaxNo

Related product manuals