Lexmark CX310 series - Print Is too Light

Action Yes No
Step 4
a Depending on your operating system, specify the paper type,
texture and weight from Printing Preferences or from the Print
dialog.
b Resend the print job.
Is the print still too dark?
Go to step 5. The problem is
solved.
Step 5
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
From the printer
control panel, set the
paper texture in the
Paper menu to match
the paper loaded on
the tray.
Go to step 6.
Step 6
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you use it.
b Resend the print job.
Is the print still too dark?
Go to step 7. The problem is
solved.
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too dark?
Contact
customer
support.
The problem is
solved.
Print is too light
Action Yes No
Step 1
a From the Quality menu on the printer control panel, select
Color Adjust.
b Resend the print job.
Is the print still too light?
Go to step 2. The problem is
solved.
Troubleshooting 200