Lexmark CX310 series User Manual

Use To
Mac Binary PS
On
O
Auto
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
• Auto is the factory default setting.
• O filters print jobs using the standard protocol.
• On processes raw binary PostScript print jobs.
Standard Network Setup OR
Network [x] Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Display and set the printer network settings.
Note: The Wireless menu appears only when the printer is connected to a
wireless network.
Reports menu
To access the menu, navigate to either of the following:
• Network/Ports > Standard Network > Standard Network Setup > Reports
• Network/Ports > Network [x] > Network [x] Setup > Reports
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.
Network Card menu
To access the menu, navigate to either of the following:
• Network/Ports > Standard Network > Standard Network Setup > Network Card
• Network/Ports > Network [x] > Network [x] Setup > Network Card
Use To
View Card Status
Connected
Disconnected
View the connection status of the wireless network adapter.
View Card Speed View the speed of an active wireless network adapter.
Network Address
UAA
LAA
View the network addresses.
Understanding the printer menus 86

Lexmark CX310 series Specifications

General

Print Technology	Color Laser
Scan Technology	CIS
ADF Capacity	50 sheets
Duplex Printing	Yes
Standard Connectivity	USB 2.0, Ethernet
Memory	512 MB
Display	2.4-inch color LCD
Maximum Paper Size	8.5 x 14 inches
Scanner Type	Flatbed, ADF
Processor Speed	800 MHz
Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Network Connectivity	Ethernet
Operating Systems Supported	Windows, Mac OS, Linux
Standard Paper Input	250 sheets
Paper Capacity	250 sheets
Fax	No