Lexmark CX310 series - Setting up the printer software

Use the To
1 USB printer port Connect the printer to a computer.
2 Ethernet port Connect the printer to an Ethernet network.
3 USB wireless port Attach an optional wireless network adapter.
4 Security lock port Lock the system controller board.
5 Printer power cord socket Connect the printer to a properly grounded electrical outlet.
Setting up the printer software
Installing the printer software
1 Obtain a copy of the software installer package.
• From the software CD that came with your printer.
• Go to http://support.lexmark.com, and then select your printer and operating system.
2 Run the installer, and then follow the instructions on the computer screen.
3 For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Additional printer setup 23