Lexmark CX310 series User Manual

Copying
Automatic document feeder (ADF) Scanner glass
ABC
Use the ADF for multiple‑page documents.
Note: The ADF scans only one-side of the page.
Use the scanner glass for single-page documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
Making copies
Making a quick copy
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure the size of the original document and the size of the copy
paper are the same.
3 From the printer control panel, press .
Copying using the ADF
1 Load an original document faceup, short edge first into the ADF tray.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
Copying 55

Lexmark CX310 series Specifications

General

Print Technology	Color Laser
Scan Technology	CIS
ADF Capacity	50 sheets
Duplex Printing	Yes
Standard Connectivity	USB 2.0, Ethernet
Memory	512 MB
Display	2.4-inch color LCD
Maximum Paper Size	8.5 x 14 inches
Scanner Type	Flatbed, ADF
Processor Speed	800 MHz
Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Network Connectivity	Ethernet
Operating Systems Supported	Windows, Mac OS, Linux
Standard Paper Input	250 sheets
Paper Capacity	250 sheets
Fax	No