Lexmark CX310 series - Page 21

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Install the printer and any optional tray in the following order:
• Optional 650‑sheet duo tray with integrated multipurpose feeder (Tray 2)
• Printer
Installing a 650‑sheet duo tray
The printer supports an optional 650‑sheet duo tray (Tray 2) with an integrated multipurpose feeder.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
1 Unpack the optional 650‑sheet duo tray, and then remove all packing material and the dust cover.
2 Place the tray in the location chosen for the printer.
Additional printer setup 21