Use To
Run Initial Setup
Ye s
No
Run the setup wizard.
Paper Sizes
US
Metric
Specify the unit of measurement for paper sizes.
Notes:
• US is the factory default setting.
• The initial setting is determined by your country or
region selection in the initial setup wizard.
Scan to PC Port Range
[port range]
Specify a valid port range for printers behind a port blocking
firewall.
Note: 9751:12000 is the factory default setting.
Home screen customization
Change Language
Copy
E‑mail Shortcuts
FTP Shortcuts
Search Held Jobs
Held Jobs
Bookmarks
Jobs by User
Change the icons that appear on the home screen.
For each icon, select from the following options:
Display
Do Not display
One Page Copy
O
On
Set copies from the scanner glass to only one page at a time.
Note:
O
is the factory default setting.
Allow Background Removal
On
O
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Allow Custom Job Scans
On
O
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then
Allow Custom Job Scans can be enabled for specific jobs.
Scanner Jam Recovery
Job Level
Page Level
Specify how a scanned job should be reloaded if a paper jam
occurs in the ADF.
Note: Job level is the factory default setting.
Alarms
Alarm Control
Cartridge Alarm
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
O
Single
Continuous
Notes:
• Single is the factory default setting. This sounds three
quick beeps.
• Continuous repeats three beeps every 10 seconds.
Understanding the printer menus 96
To Next Page
Loading...
Need help?
General
