Diagnostic information 2-95
4062
924.25 Open fuser thermistor
check
Fuser type = 2
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
924.26 Open fuser thermistor
check failure.
Fuser type = 2
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
924.50 Open fuser thermistor
check
Fuser type = 1
Fuser page count has
exceeded life.
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
924.51 Open fuser thermistor
check failure.
Fuser type = 1
Fuser page count has
exceeded life.
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
924.75 Open fuser thermistor
check
Fuser type = 2
Fuser page count has
exceeded life.
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
924.76 Open fuser thermistor
check failure.
Fuser type = 2
Fuser page count has
exceeded life.
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal (T650, T652, T654)”
on page 4-16.
925.00 Incorrect fuser or
fuser lamp detected.
Fuser type = 1
The machine detected a 115 V
lamp in a 220 V machine. The
fuser lamp has an excessive
wattage rating.
1. Turn the machine off/on
and ensure the fuser unit
assembly is properly
installed.
2. Ensure the proper voltage
fuser is installed in the
machine.
3. Replace the fuser unit
assembly if problem
remains. Go to “Fuser unit
assembly removal (T650,
T652, T654)” on
page 4-16.
Error
code or
message
Error contents Description/Action Possible repair actions
To Next Page
Loading...
