4-24 Service Manual
4062-XXX
3. Remove the spring.
Replacement Warning: When replacing the option drive shaft, ensure that the plastic hook (A) is not
damaged, or the option drive shaft will not remain secured.
Main drive motor assembly removal (T650, T652, T654)
1. Remove the system card assembly. Go to “System card assembly removal (T650, T652, T654)” on
page 4-69.
2. Remove the fuser drive release linkage. Go to “Fuser drive release linkage removal (T650, T652, T654)”
on page 4-16.
3. Close the operator panel door assembly.
4. Remove the four screws (A) securing the main drive motor assembly to the machine.
5. Gently remove the main drive motor assembly.
To Next Page
Loading...
