Lexmark T650n - Sensor (Pass Through) with Cable Removal

Repair information 4-113
4062-XXX
Sensor (pass through) with cable removal
1. Remove the 550-sheet frame assembly. Go to “550-sheet frame assembly removal” on page 4-109.
2. Disconnect the sensor (pass through) cable connector from the 550-sheet controller card.
3. Remove the sensor (pass through) with cable.
550-sheet controller card assembly removal
1. Remove the 550-sheet frame assembly. Go to “550-sheet frame assembly removal” on page 4-109.
2. Disconnect the three connectors from the 550-sheet controller card assembly.