4-62 Service Manual
4062-XXX
Sensor (standard bin exit) removal (T650, T652, T654)
1. Remove standard bin actuator assembly. Go to “Sensor (standard bin exit) removal (T650, T652, T654)”
on page 4-62.
2. Release the hooks (A) securing the sensor (standard bin exit) to the assembly.
3. Remove the sensor (standard bin exit).
Sensor (toner density) removal (T650, T652, T654)
1. Remove the sensor shield assembly. Go to “Sensor shield assembly removal (T650, T652, T654)” on
page 4-61.
2. Remove the two screws (A) securing the sensor (toner density) to the machine.
3. Remove the sensor (toner density).
4. Disconnect the connection (B) to the sensor (toner density).
Switch (media size) assembly removal (T650, T652, T654)
1. Remove the side cover, left. Go to “Side cover, left removal (T650)” on page 4-21 or “Side cover, left
removal (T652 and T654)” on page 4-22.
To Next Page
Loading...
