4-58 Service Manual
4062-XXX
Side cover, right removal (T652, T654)
1. Open the operator panel door assembly.
2. Open the MPF tray door assembly.
3. Remove the cover assembly, rear lower. Go to “Cover assembly, rear lower (T652, T654)” on page 4-54.
4. Remove the five screws (A) securing the side cover, right to the machine.
5. Remove the side cover, right.
Sensor (duplex input) removal (T652, T654)
1. Remove the duplex input sensor assembly. Go to “Duplex input sensor assembly removal (T652,
T654)” on page 4-11.
2. Release the hooks (A) securing the senor (duplex media path) to the bracket.
3. Remove the sensor (duplex input).
To Next Page
Loading...
